# Problem while building bro

**URL:** <https://community.zeek.org/t/problem-while-building-bro/1022>\
**Category:** Zeek\
**Created:** [September 25, 2006, 7:45pm UTC](https://community.zeek.org/t/problem-while-building-bro/1022 "2006-09-25T19:45:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pallavi\_Joshi](https://avatars.discourse-cdn.com/v4/letter/p/a9a28c/32.png) [@Pallavi\_Joshi](https://community.zeek.org/u/Pallavi_Joshi)\
**Post date:** [September 25, 2006, 7:45pm UTC](https://community.zeek.org/t/problem-while-building-bro/1022/1 "2006-09-25T19:45:41Z")

</div>

Hi,

While building bro, I got an error because termcap.h was not found. After I included termcap.h in libedit, term.c got compiled but I got a segmentation fault saying: Command failed for target  
`dce\_rpc\_pac.cc'. How can I fix this up?

Thanks,

Pallavi

---

<div class="post-metadata">

**Author:** ![Pallavi\_Joshi](https://avatars.discourse-cdn.com/v4/letter/p/a9a28c/32.png) [@Pallavi\_Joshi](https://community.zeek.org/u/Pallavi_Joshi)\
**Post date:** [September 25, 2006, 8:22pm UTC](https://community.zeek.org/t/problem-while-building-bro/1022/2 "2006-09-25T20:22:26Z")

</div>

I am trying to build bro-1.1 on SunOS 5.9 and here is the output before make fails.

./bifcl ./event.bif  
./bifcl ./const.bif  
./bifcl ./common-rw.bif  
./bifcl ./finger-rw.bif  
./bifcl ./ident-rw.bif  
./bifcl ./ftp-rw.bif  
./bifcl ./smtp-rw.bif  
./bifcl ./http-rw.bif  
./bifcl ./strings.bif  
perl ./make\_dbg\_constants.pl ./DebugCmdInfoConstants.in  
make all-recursive  
Making all in binpac  
source='pac\_parse.cc' object='pac\_parse.o' libtool=no \  
depfile='.deps/pac\_parse.Po' tmpdepfile='.deps/pac\_parse.TPo' \  
depmode=none /bin/bash ../../depcomp \  
g++ -DHAVE\_CONFIG\_H -I. -I. -I../.. -W -Wall -Wno-unused -I/home/eecs/pallavi/libpcap-0.9.4 -I/home/eecs/pallavi/libpcap-0.9.4 -g -O2 -c -o pac\_parse.o `test -f pac_parse.cc || echo './'`pac\_parse.cc  
source='pac\_scan.cc' object='pac\_scan.o' libtool=no \  
depfile='.deps/pac\_scan.Po' tmpdepfile='.deps/pac\_scan.TPo' \  
depmode=none /bin/bash ../../depcomp \  
g++ -DHAVE\_CONFIG\_H -I. -I. -I../.. -W -Wall -Wno-unused -I/home/eecs/pallavi/libpcap-0.9.4 -I/home/eecs/pallavi/libpcap-0.9.4 -g -O2 -c -o pac\_scan.o `test -f pac_scan.cc || echo './'`pac\_scan.cc  
source='pac.cc' object='pac.o' libtool=no \  
depfile='.deps/pac.Po' tmpdepfile='.deps/pac.TPo' \  
depmode=none /bin/bash ../../depcomp \  
g++ -DHAVE\_CONFIG\_H -I. -I. -I../.. -W -Wall -Wno-unused -I/home/eecs/pallavi/libpcap-0.9.4 -I/home/eecs/pallavi/libpcap-0.9.4 -g -O2 -c -o pac.o `test -f pac.cc || echo './'`pac.cc  
source='pac\_main.cc' object='pac\_main.o' libtool=no \  
depfile='.deps/pac\_main.Po' tmpdepfile='.deps/pac\_main.TPo' \  
depmode=none /bin/bash ../../depcomp \  
g++ -DHAVE\_CONFIG\_H -I. -I. -I../.. -W -Wall -Wno-unused -I/home/eecs/pallavi/libpcap-0.9.4 -I/home/eecs/pallavi/libpcap-0.9.4 -g -O2 -c -o pac\_main.o `test -f pac_main.cc || echo './'`pac\_main.cc  
source='pac\_output.cc' object='pac\_output.o' libtool=no \  
depfile='.deps/pac\_output.Po' tmpdepfile='.deps/pac\_output.TPo' \  
depmode=none /bin/bash ../../depcomp \  
g++ -DHAVE\_CONFIG\_H -I. -I. -I../.. -W -Wall -Wno-unused -I/home/eecs/pallavi/libpcap-0.9.4 -I/home/eecs/pallavi/libpcap-0.9.4 -g -O2 -c -o pac\_output.o `test -f pac_output.cc || echo './'`pac\_output.cc  
source='pac\_utils.cc' object='pac\_utils.o' libtool=no \  
depfile='.deps/pac\_utils.Po' tmpdepfile='.deps/pac\_utils.TPo' \  
depmode=none /bin/bash ../../depcomp \  
g++ -DHAVE\_CONFIG\_H -I. -I. -I../.. -W -Wall -Wno-unused -I/home/eecs/pallavi/libpcap-0.9.4 -I/home/eecs/pallavi/libpcap-0.9.4 -g -O2 -c -o pac\_utils.o `test -f pac_utils.cc || echo './'`pac\_utils.cc  
g++ -g -O2 -o binpac pac\_parse.o pac\_scan.o pac.o pac\_main.o pac\_output.o pac\_utils.o -lresolv -lpcap -lpcap -L/home/eecs/pallavi/libpcap-0.9.4 -lpcap -lnsl -lsocket -ltermcap  
../src/binpac/binpac ./dce\_rpc.pac  
\*\*\* Signal 11  
make: Fatal error: Command failed for target `dce\_rpc\_pac.cc'  
Current working directory /home/eecs/pallavi/bro-1.1/src  
\*\*\* Error code 1  
make: Fatal error: Command failed for target `all-recursive'  
Current working directory /home/eecs/pallavi/bro-1.1/src  
\*\*\* Error code 1  
make: Fatal error: Command failed for target `all'

Pallavi Joshi wrote:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/zeek/original/1X/f09d732bc2cc7c7cc7e35db67cf4e1d5233ce7a7.png) [@system](https://community.zeek.org/u/system)\
**Post date:** [May 6, 2022, 3:37pm UTC](https://community.zeek.org/t/problem-while-building-bro/1022/3 "2022-05-06T15:37:58Z")

</div>